https://mobirise.com/
image of fibre cell phone signal booster

RPT-900H RF Over Fibre Cell Phone Signal Booster System

 

 Improve Cell Phone Signal Reception In Hard To Reach Locations.

FOR IN-BUILDING OR OUTDOOR USE

The RPT-900H is a carrier class cellular fibre optic repeater (booster) system for CDMA, GSM, AMPs, WCDMA, 4G LTE. The unit converts RF signals to fibre optic for long distance transport which are then converted back to RF.

The RPT900H operates in a Master and Remote configuration. The Master unit initially converts the RF signal to light and via fibre optic cable transmits the light signal to the Remote unit. The Remote unit converts the light signal back to RF and then broadcasts the signal around the coverage area. Multiple Remote units can be connected to one Master Unit. When used in this manner the Master unit will control the signal provided to the Remote Units.

Using fibre optic technology allows antennas to be mounted at distances not possible with coax cabling. Antennas can now be mounted kilometers/miles away from the RPT-900H Cellular Repeater.

The RPT-900H can be customized per clients requests.

Like all Telcosat products, the RPT-900H is designed and manufactured in Canada.

If you have any questions regarding cellular repeater applications indoors or outdoors, please contact us today and a member of our design team would be pleased to assist you.




Telcosat RPT-900H Technical Specifications

Unsurpassed Technical Ability

TECHNICAL SYSTEM SPECIFICATION

 

Frequency Range- 824 - 849 MHz (Uplink), 869 - 894 MHz (Downlink)
Passband Gain - 95 dB
Pass Band Ripple - ± 2.5 dB
Channel Ripple - 2 dB Maximum
Max Absolute Delay - less than 2 µs Rx
Noise Figure @ Max Gain- 3.7 dB Typical
IMD 2 Tone - 43 dBc Typical @ Max Power
Max Power Output - 30 dBm RMS
EVM - less than 3%
Max SWR (In / Out) - 1.5 : 1
Manual Gain Control - 50 dB in 2dB Steps
Spurious Outputs - 55 dBc
Max Power Supply - 28 VDC @ 55 W, 90 - 260 VAC
Operating Temperature - -30ºC to +60ºC
RF Connectors - 50 Ohm N Type, Female
Unit Size - 14.5" x 16.5" x 11.5", 36 x 41 x 29 cm
Weight - 44 lbs, 20 kg Typical
Enclosure Type - Nema 4A, 12
FCC and Industry Canada Certified